丙烯酸水溶液聚合法制备PTFE/PAA/Nafion膜及其性能

采用廉价的多孔聚四氟乙烯(PTFE)膜作为基底, 用少量的Nafion与PTFE膜复合可制备低成本的质子膜. 但疏水性的PTFE膜与亲水性的Nafion膜结合性不佳. 基于此, 本文对疏水性的PTFE膜材料表面进行设计, 先采用丙烯酸对疏水性的PTFE膜表面进行亲水性改性, 再喷涂亲水性Nafion膜, 完成低成本PTFE/PAA/Nafion膜的制备. 实验结果表明, 改性前的PTFE膜材料水接触角为150°, 改性后的膜接触角变为55.6°, 亲水性大幅上升, 膜的机械强度和尺寸稳定性(断裂强度为25.2 MPa, 80 ℃下的溶胀率为11.9%)均优于Nafion117膜, 而 Nafion用量则节省了60%. PTFE/PAA/Nafion膜具有高质子导通率(80 ℃下达到131.9 mS/cm), 接近于Nafion117膜, 最大功率密度可以达到404.2 mW/cm².     

机械球磨制备三苯胺基PAF-106s及C2烃吸附性质

以三苯胺为单体, 无水三氯化铁为催化剂, 二甲醇缩甲醛为外交联剂, 通过机械球磨不同比例的三苯胺、 三氯化铁和二甲醇缩甲醛, 合成了PAF-106s(PAF-106a~PAF-106c, PAF: porous aromatic framework). 红外光谱、 元素分析、 X射线光电子能谱和固体核磁共振波谱等表征结果证明发生了聚合反应. 氮气吸附结果表明, 三苯胺、 三氯化铁和二甲醇缩甲醛的比例影响PAF-106s的多孔性能. 三氯化铁和三苯胺摩尔比从3∶1增加到12∶1时, PAF-106c的BET比表面积从PAF-106a的135 m²/g增加到280 m²/g. 引入二甲醇缩甲醛后, PAF- 106d~PAF-106g的BET比表面积随三氯化铁和二甲醇缩甲醛摩尔比的增加而逐渐降低. 在273和298 K下, 测试了PAF-106c的C2烃吸附性能, 并采用理想吸附溶液理论计算了C₂H₂/C₂H₄和C₂H₆/C₂H₄分离比.     

层间共价增强石墨烯材料的构筑、性能与应用

大批量石墨烯可控制备技术的逐渐成熟为实现其宏观组装和应用提供了基础。在众多的组装策略中,调节石墨烯层间的界面相互作用可以直接影响组装体的力学、电学、热学以及渗透等性质,具有重要的意义。石墨烯片层间以共价键连接的层间共价石墨烯材料以其可调的层间距、较强的层间作用力、丰富的功能化、以及可能的原子构型重排等特性,受到了广泛的关注和深入的研究。相比于其他非共价的键合手段,共价连接是一种更为牢固的枢纽。本文中我们将总结讨论层间共价石墨烯材料的构筑方法、性能以及应用。在构筑方法中,依据石墨烯本身的制备方法分为氧化还原法以及化学气相沉积法,而在氧化还原法中,以其宏观材料的形貌分为纸状和纤维状来讨论。接着,我们重点介绍了层间共价对其力学和电学性能的影响,并概述了此类宏观组装体材料的应用。层间共价石墨烯材料继承了石墨烯自身优异的特性,同时也具有宏观组装所赋予的性能,有望在多个领域得到广泛的应用。     

单侧摩擦约束夹杂物的瞬态弹性波散射的时域边界元分析--反平面情况

应用时域边界元法研究了瞬态SH波对单侧摩擦约束夹杂物的散射问题，假设摩擦遵守库仑定量，当入射SH波足够强时界面会出现局部滑移，发现了一种有效的迭代技术以确定边界上的未知区域（滑移和粘着区）。算例计算了无限域中圆柱埋置夹杂物对瞬态SH波的散射问题。     

Energy release rates in a constrained epoxy disc with Hookean and Mooney–Rivlin materials

Assuming that the disc material can be modeled either as Mooney–Rivlin or as Hookean and the steel ring enclosing the disc as Hookean, the energy release rates as a function of the crack length are evaluated and compared. Two loadings are considered––one in which the surface of the star shape hole in the disc is loaded by a uniform pressure and the other in which the temperature of the composite body is uniformly raised. It is found that the linear and the nonlinear analyses give qualitatively similar results for the two loadings. For each load, the energy release rate increases with an increase in the starter crack length, reaches a maximum value and then decreases gradually.     

各向异性非线性强度条件下的边坡稳定性

解释了土体强度各向异性、非线性的物理本质,结合常规直剪试验、三轴试验结果,在前人工作基础上建立了边坡稳定性分析中强度各向异性、非线性的描述方法,其中特别提出了一个各向异性函数．基于Janbu普遍条分法(GPS),运用SPREADSHEET模板程序,提出了一个能将各向异性、非线性强度准则逐点等效到Mohr-Coulomb直线强度准则处理上的迭代方法,准确方便地获得了非线性强度下的边坡稳定性分析．最后的算例展示了方法的使用过程。     

Elasticity and Electromagnetism

Classical electrodynamics can be constructed formally as the theory of a linear elastic continuum. The Coulomb gauge expresses the medium incompressibility. The vector potential corresponds to the medium velocity. The pressure stands for the scalar potential. The electric field is modelled by an external force whose origin is beyond the elastic model. The electric charge corresponds to a medium defect which produces the perturbation ~ 1/r of the pressure field. The defects interact with each other according to the conservation law in the torsion field of the medium.     

一类强非线性机械基础系统的亚谐振动解析解

建立了机械基础动力系统的强非线性动力学模型，利用能量法对该系统的周期解进行了解析研究，确定了系统动态参数满足周期解的条件、系统的周期解以及解的稳定性判别式。发现了亚谐振动，并给出了系统在满足周期解条件下的一组参数对应的主振动、1／3亚谐振动和1／5亚谐振动。最后利用数值积分方法计算了系统在给定条件下的主振动及亚谐振动解，考察了解析解的正确性。     

Model identification and FE simulations: Effect of different yield loci and hardening laws in sheet forming

The bi-axial experimental equipment [Flores, P., Rondia, E., Habraken, A.M., 2005a. Development of an experimental equipment for the identification of constitutive laws (Special Issue). International Journal of Forming Processes] developed by Flores enables to perform Bauschinger shear tests and successive or simultaneous simple shear tests and plane strain tests. Flores investigates the material behavior with the help of classical tensile tests and the ones performed in his bi-axial machine in order to identify the yield locus and the hardening model. With tests performed on one steel grade, the methods applied to identify classical yield surfaces such as [Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic materials. Proceedings of the Royal Society of London A 193, 281–297; Hosford, W.F., 1979. On yield loci of anisotropic cubic metals. In: Proceedings of the 7th North American Metalworking Conf. (NMRC), SME, Dearborn, MI, pp. 191–197] ones as well as isotropic Swift type hardening, kinematic Armstrong–Frederick or Teodosiu and Hu hardening models are explained. Comparison with the Taylor–Bishop–Hill yield locus is also provided. The effect of both yield locus and hardening model choices is presented for two applications: plane strain tensile test and Single Point Incremental Forming (SPIF).     

含材料非线性的复合材料单钉接头累积损伤分析

发展了静拉伸复合材料接头层合板三维逐渐损伤模型,考虑了单层复合材料在材料1-2面及3-1面上具有明显非线性剪切应力-应变关系的叠层非线性效应,结合有限元技术即应力分析、失效判定准则及损伤过程中材料性能退化等,对接头层合板损伤扩展进行了模拟,结果表明考虑材料非线性的影响与实验结果吻合更好.